Background Image
Table of Contents Table of Contents
Previous Page  20 / 24 Next Page
Information
Show Menu
Previous Page 20 / 24 Next Page
Page Background

Marlin NanoLube

marlinnanolube.com

TECHNICAL INFORMATION

GAS & DIESEL FUEL BOOSTER - NL20300

DIRECTIONS (

SHAKE WELL BEFORE USE)

We have formulated two products to make it easier for vehicles with smaller fuel tanks. The 10oz. Bottle treats 20gal of gasoline or diesel fuel.

The 32oz, 1 gallon, 5 gallon and 54 gallon drum are a heavier concentrated product for vehicles with larger fuel tanks. Add to gasoline &/or

Diesel fuel tank at approximately 1oz per 10gallions.

20300 can also be mixed with a 2-stroke gas/oil mixture (use 10oz. Bottle formula only), or can be added to 2-stroke oil. The dosage is the

same as for 4-cycle engines.

DO NOT ADD TO EMPTY FUEL TANK. Make sure fuel tank has at least five to ten (5-10) gallons of fuel in tank, then add 20300 to the fuel tank

(this is to ensure good mixing in fuel-tank) at proper treat ratio and fill fuel tank to the full level.

NanoLube Gas & Diesel Fuel Booster is a multipurpose

gasoline/diesel fuel additive, which modifies the fuel’s

physical properties, rather than fuel chemistry. It is a

high molecular weight form of Polyisobutylene (PIB). It is

a pure hydrocarbon (i.e. contains only Carbon and

Hydrogen), and as such is exempt from EPA regulations

and helps to meet EURO 5 Standards.

The active component present in this product was tested

by Testing Laboratories.

When blended with gasoline, it increases engine power,

increases the apparent octane value, reduces fuel

consumption and reduces emissions of CO, HC and NOx.

It modifies gasoline atomization, vaporization and

atomized droplet behavior.

The benefits derived from modification of gasoline

vaporization behavior are: a more homogeneous burn of

all components at ignition and during flame propagation,

More optimum ignition timing for highest BMEP, Faster

flame propagation giving higher BMEP and more

complete combustion, Lower

combustion gas temperature reducing

engine octane requirement.

The benefits derived from modification

of gasoline spray droplet behavior are: More uniform

spray droplet formation, Reduced wall wetting, More fuel

entrained in the air/fuel charge during transients and

cold starts.

When blended with diesel fuel, 20300 increases engine

power, reduces combustion gas temperatures, reduces

consumption and reduces emissions of unburned

hydrocarbon and NOx.

NL20300-10 10oz pour bottle $24/ea

APPLICATIONS

FEATURES

reducing wall wetting.

transients and cold starts.

the cross section of the diesel spray cone.

diesel injector spray.

across the cross section of the spray cone.

cause early ignition.

penetration.

BENEFITS

power, increases the apparent octane value, reduces

fuel consumption, and reduces emissions of CO, HC

and NOx. It modifies gasoline atomization,

vaporization and atomized droplet behavior.

power, reduces combustion gas temperatures,

reduces consumption and reduces emissions of

FLASH POINT °F

>144

POUR POINT °F

>-4

POUNDS PER GALLON

6.84

COLOR

TRANSLUCENT

Warranty: All products purchased from Nano Lube Corporation are subject to terms and conditions set out in the contract, order acknowledgment and/or bill of

lading. Nano Lube Corporation warrants only that its product will meet those specifications designated as such herein or in other publications. All other infor-

mation supplied by Nano Lube Corporation is considered accurate but is furnished upon the express condition that the customer shall make its own assessment

to determine the product’s suitability for a particular purpose. No warranty is expressed or implied regarding such other information, the data upon which the

same is based, or the results to be obtained from the use thereof; that any product shall be merchantable or fit for any particular purpose, or that the use of

such other information or product will not infringe any patent. PRICES SUBJECT TO CHANGE WITHOUT NOTICE

NanoLube