11 / 24
Marlin NanoLube
™
marlinnanolube.comTECHNICAL INFORMATION
SOLUBLE-OIL MACHINING FLUID - NL55764
SOLUBLE-OIL MACHINING FLUID TYPICAL RESULTS
1. Increase in parts produced
2. Energy reduction
DIRECTIONS (
SHAKE WELL BEFORE USE)
NanoLube Soluble-Oil Machining Fluid can be used at dilutions of 10:1 to 40:1 depending on the
severity of the operation. Dilutions beyond 50:1 are NOT recommended for ferrous metals because
corrosion can be encountered.
NanoLube Soluable-Oil Machining Fluid, is a fully
formulated soluble oil metalworking fluid. It does not
contain chlorinated paraffin. It was formulated for
machining operations on non-ferrous metals, steel and
cast iron.
Benefits include: excellent cleanliness, excellent surface
finishes, good hard water stability and outstanding cost
performance. Field use has shown improved machining at
one half the concentration of a standard soluble oil.
NanoLube Soluble-Oil Machining Fluid is environmentally
safe. It contains NO chlorine, nitrites, heavy metals,
phenols, or diethanolamine.
NanoLube Soluable-Oil Machining Fluid, typical
specifications below.
Available: NL55764-1 1 gallon bottle $143/GAL
APPLICATIONS
-ferrous metals
FEATURES
nitrites, heavy metals, phenols, nor diethanolamine
BENEFITS
SPECIFIC GRAVITY @ 60°F
0.910
PH, 5% IN DI WATER
9.6
POUNDS PER GALLON
7.7
COLOR
AMBER
Warranty: All products purchased from Nano Lube Corporation are subject to terms and conditions set out in the contract, order acknowledgment and/or bill of
lading. Nano Lube Corporation warrants only that its product will meet those specifications designated as such herein or in other publications. All other infor-
mation supplied by Nano Lube Corporation is considered accurate but is furnished upon the express condition that the customer shall make its own assessment
to determine the product’s suitability for a particular purpose. No warranty is expressed or implied regarding such other information, the data upon which the
same is based, or the results to be obtained from the use thereof; that any product shall be merchantable or fit for any particular purpose, or that the use of
such other information or product will not infringe any patent. PRICES SUBJECT TO CHANGE WITHOUT NOTICE
NanoLube
™