Background Image
Table of Contents Table of Contents
Previous Page  7 / 24 Next Page
Information
Show Menu
Previous Page 7 / 24 Next Page
Page Background

Marlin NanoLube

marlinnanolube.com

TECHNICAL INFORMATION

NANOLUBE LITHIUM GREASE - NL00880

NANOLUBE LITHIUM COMPLEX GREASE TYPICAL RESULTS

Smoother Action; eliminated scratching, galling, marring

Will usually take 20 minutes to penetrate metal pours and will improve with operational usage.

DIRECTIONS

Use NanoLube Lithium Grease same as you would conventional grease

NanoLube Lithium Complex Grease is the latest in lithium

complex grease technology for Industrial applications. It

can be applied with complete confidence in automotive

and industrial plain and anti-friction bearings, in hot or

cold environments, under wet or dry conditions, and with

light or heavy loads.

Because of its wide range of application possibilities,

coupled with a special extreme pressure additives

system, NanoLube Lithium Complex Grease is truly a

grease for all seasons. Contains no heavy metals or

chlorine compounds. Also friendly to copper containing

components at high temperature.

This is an excellent shear stable product with exceptional

extreme pressure characteristics and excellent water

resistance, it is recommended for on and off-road

equipment, fleet and commercial applications. It has

excellent mobility characteristics at low temperatures.

Another outstanding feature is its compatibility with a

wide variety of seal materials, such as Nitrile, Silicone,

Hytrel, Viton and Neoprene.

Available:

NL00880-14 14oz tubes $16/EA

NL00880-35 35lbs pail

$640/EA

APPLICATIONS

-friction bearings

FEATURES

BENEFITS

maintenance costs

characteristics at low temperature

THICKENER

LITHIUM COMPLEX

NLGI, CONSISTANCY GRADE, ASTM D217

2

TEXTURE

SMOOTH/TACKY

DROPPING POINT °F, ASTM D2265

550

PENETRATION WORKED, ASTM D217

265-295

100,000 STROKES CHANGE FROM 60 STROKES

+20

WHEEL BEARING LEAKAGE, GM, ASTM D1264

3.0

TIMKEN OK LOAD, LBS, ASTM D2509

80

WATER SPRAY-OFF, %, MAX, ASTM D4049

10

COPPER COROSION ASTM-D-4043, RATING

1a

OXIDATION STABILITY, PSI DROP 100HRS, ASTM D942

1.5

FOUR BALL EP, WELD, KGF, ASTM D2596

500

FOUR BALL EP WEAR SCAR, MM, ASTM D2266

0.50

DI RUST PREVENTION, ASTM D1743

PASS

OIL VISCOSITY @ 40°C, cSt, ASTM D445

460

VISCOSITY INDEX, ASTM D2270

97+

POUNDS PER GALLON

8.16

COLOR

RED

Warranty: All products purchased from Nano Lube Corporation are subject to terms and conditions set out in the contract, order acknowledgment and/or bill of

lading. Nano Lube Corporation warrants only that its product will meet those specifications designated as such herein or in other publications. All other infor-

mation supplied by Nano Lube Corporation is considered accurate but is furnished upon the express condition that the customer shall make its own assessment

to determine the product’s suitability for a particular purpose. No warranty is expressed or implied regarding such other information, the data upon which the

same is based, or the results to be obtained from the use thereof; that any product shall be merchantable or fit for any particular purpose, or that the use of

such other information or product will not infringe any patent. PRICES SUBJECT TO CHANGE WITHOUT NOTICE

NanoLube